Art making a lid, 3D kit and cold enamel
This time a piece of reuse in combination with Collall Cold enamel and silicone 3D kit. The latter is a transparent kit that is inside a tube. This material stays as thick as it comes out of the tube, so you can create fun 3D creations!
Here was an old lid that seemed suitable for a painting. Of course, the lid has to be good fat free. You can apply this thick kit directly from the tube. What stands out is the vinegar scent, but that quickly fades. I put the kit in several compartments on the lid. Each kit edge fits well with the one they intersect with.
I used big glitter stones to pinch the edge. Just press this one in the kit. After this was done, I got to work with cold enamel. This can be applied from the bottle to your surface. I chose a white surface. In it I dripped divided red, blue and yellow. I connected these points with a cocktail stick that takes you through the points and pulls through the points. Is one color too little? Drip a little extra in again and continue. You'll see you're starting to get a nice marbling.
And the kit? It stays in place just like the cold enamel.! Preferably let it dry for a few days so that everything is cured nicely. Make a rope through the edge of the lid and hang your artwork!
Comment with a minimum of 10 words.