How Should A Solid Wood Floor Be Installed?


Wood is the best material for our flooring in terms of its natural beauty and durability. Wood flooring will always be the preferred choice for homeowners and contractors alike, whether it is installed in the living room, family room, dining room, or any other area of the house since it is both functional and aesthetically pleasing. However, because wood expands and shrinks as a result of moisture, and because prolonged exposure to water can cause rotting, many homeowners are reluctant to install solid wood flooring in bathrooms. In actuality, solid wood flooring may be utilised in bathrooms if the correct finishing and upkeep are carried out.

Tip: Laminate flooring is a synthetic multi-layer flooring product that has been laminated together. Wood-like imitation laminate flooring Particle Board wood serves as the substrate for laminate flooring, which are covered with an image layer and a translucent wear layer.

Getting Ready for the Installation of Solid Wood Floors

Make sure the foundation flooring for your new solid wood floors is level, smooth, structurally sound, and clean. They must be placed indoors for a few days before starting the actual installation of your wood flooring so that the wood can acclimate to the humidity level in your home.

Installing Wooden Flooring: Steps

1. Adhere to an installation strategy that has the solid wood floor laid perpendicular to the floor joists.
2. For future reference, the floor joist positions along the wall must be indicated.
3. An asphalt felt covering must be applied to the subfloor to reduce squeaks and stop moisture buildup.
4. Mark the centerline of the area where the solid wood floor will be put.
5. If your room isn't perfectly square and you're putting wood flooring, line up the tongue of the first row with your centerline and tear the side of the groove at an angle parallel to your wall.
6. During installation, be sure to arrange the boards in many rows and stagger them such that an end joint on one row does not touch the end joint of the row after it by more than a foot.
7. To fit at the ends of each row, cut sections no less than 8 inches long as you are placing the strips. Additionally, you must leave a gap of half an inch from the wall.
8. Attach the solid wood flooring to the subflooring with fasteners. Sanding and polishing come next when the solid wood floor installation is finished.
Share
Earn €1 per 1000 shares.