Mohammad Shakil

· 21 Nov 2021

Follow Following

How To Clean Your Bathroom Efficiently in 10 Easy Steps

It takes work and patience to make your bathroom and bathroom spick and span. While it is not something we all long for, it is work we cannot escape. But if you follow the procedure, working in one place at a time, you will ensure that you do the cleaning job properly.

Follow these 10 steps on how to clean your bathroom effectively and efficiently:

Step 1 - Clean the bathroom For effective cleaning, remove ALL items in the bathroom. It is better to remove everything at once instead of leaving. Put all your little things in the last box out of the bathroom and throw the used linen (including rugs) in the washer.

Step 2 - Dust and sweep Dust and remove dust from all areas. Use a long handle to reach corners, light, and airy items. When the whole area is covered with dust, sweep (or clean) the bathroom to remove dust, dirt, and hair.

Step 3 - Install the cleaner Install cleaners in your bathroom. If you clean regularly, you can use an all-purpose cleaner but an acid cleaner is recommended if you need to remove build-up from your tiles. Let them immerse themselves.

Step 4 - Clear Apply a detergent to your clothes or sponge and start wiping off other areas such as shower tracks, shelves, rack towels, floor boards, windows, curtains, and doors. For best practice, work in stages from the top of the room to the left to the right.

Step 5 - Prepare to clean the floor Follow the instructions on your vacuum cleaner and mix the recommended amount with a bucket full of warm water.

Step 6 - Clean Scrub buildup and loose dirt away from the area. At this point, the cleaner has done a lot of work for you so the job will be easier. Make sure you go through all the areas before bathing.

Step 7 - Complete the bathroom Return all items that you have removed from the shower and/or shower area, and wipe them clean with a clean cloth as you go. Spray a glass cleaner on your shower door if you have one and wipe it off before closing it.

Step 8 - Work in a vacuum Sprinkle the cleaner for all your purposes on your counter, tap, and sink and wipe with a clean cloth. Use a rough sponge to loosen the texture of the sink or dish of soap and wipe the floor. Use a glass cleaner on your screen.

Step 9 - Clean the toilet Use an all-purpose cleaner when scrubbing the inside of your toilet regularly. If there is a buildup, use a toilet cleaner and scrub with a toilet brush. Sprinkle out with the all-purpose cleaner and wipe with a cloth.

Step 10 - Brush down Apply your mop to your prepared cleaning solution, press out the excess, and start working on the floor. Allow drying. When dry, place freshly cleaned rugs or rugs and return the trash. Follow these 10 simple steps to clean your bathroom thoroughly.

#CleanBathroomEfficiently #CleanBathroom #Bathroomtips