Very good for people in the community.

Surely musicians who lose these parts of their guitar will have them fixed, but now I bring you an easy way for you to do it yourself and let's do it.

First connect the tuners to the top of the guitar. To do this, glue the tuner thought through the hole and place the washer and the adjusting bolt on top of the tuner.

After that put the small screw on the back. You repeat that step until you have done it with all six tuners.

Let's continue placing the end nut. The end nut is the piece between the head and the neck, and holds the strings. Attach the end nut, you can add a little glue and the strings will help you reduce too much.

Then pull out the tuning pegs as shown in the picture and the stick on the chain. Bring the pegs down to secure the strings on that side and on the other side stick the thought chain the hole in the tuner and turn the tuner until the chain is semi-tight. Repeat this step with all the strings.

Finally, you need to tune the guitar and trim the ends of the strings that are sticking out. You will need to tune your guitar several times after putting in new strings because the strings stretch out. Then you can enjoy your guitar and continue playing what you like so much.

Loading full article...