ashok.zlato

· 30 Mar 2022

Follow Following

How to Setup Linksys Extender without WPS

In order to setup your Linksys extender, you don't always require a PC with you as you can also set it up using smartphone. If you have an Android device or iPhone that is Wi-Fi enabled, then you can setup your linksys extender by using the steps given below.

Step 1: First of all, connect your Linksys extender to the power source.

Step 2: Wait for the power light to start flashing in green colour.

Step 3: Open the option of WI-Fi setting on your smartphone and then start searching for the Wi-Fi name extender setup.

Step 4: Once it gets connected, launch an internet browser on your smartphone and enter the web address extender linksys com in the location bar.

Step 5: After going to the extender setup page, carry out the instructions appearing on the screen. Then, select the home Wi-Fi network that you want for your extender.

Step 6: Disconnect the extender and then connect it within the Wi-Fi range of your router.

Step 7: Now your extender is setup and yu can finally use it.

In case you are still experiencing a problem, then you can contact the customer service experts.

How to Setup Linsys Extender without WPS Setup?

Linksys Wifi Extender Setup without WPS - There are several methods using which you can setup your Linksys extender. If you do not have a WPS button on your router, then you need to enable the virtual WPS button by going to the online router page. The WPS Linksys extender setup is preferred because this method is fast and easy.

However, if you don't wanna follow that method, then these are some of the steps that you can carry out to setup linksys extender.

Step 1: Take an ethernet cable and use it to connect your computer system to the range extender.

Step 2: After that, connect your range extender to the power source. Also, you need to make sure that the LED light is turned on.

Step 3: Launch your internet browser and enter the IP address in the location bar of the router.

Step 4: A window will open up before you, which will ask you to enter your password and username. There, you are required to leave the username section empty and enter admin in the password section. After that, choose the option of login.

Step 5: Click on Wireless and then select the option of basic wireless settings.

Step 6: Put the radio button to manual and then enter the network name of the router.

Step 7: Now in the next step, you are required to select the security settings and then enter the network name of your router.

Step 8: Enter the WEP key or passphrase in the search bar and then save settings.

Step 9: Disconnect the power wire from the range extender and router and let it remain disconnected for the next 30 seconds.

Step 10: Don't move ahead in the process till you find that the lights are stable and then reconnect the range extender.


Linksys extender setup without computer

Your range extender comes with the WPS push button. WPS is a Wi-Fi security standard that allows you to establish steady connections between the extender and your end devices. WiFi Protected Setup is the quickest way to install and set up your extender. To do the Linksys extender setup RE7000, you can use the WPS button located on the extender’s back panel. Learn how to use a WPS button to connect to the network.

Step 1- Firstly, plug in the Linksys extender to the electrical source and turn it on.

Step 2- Now, locate and press the WPS button on the extender.

Step 3- Next, head over to your home router and press the WPS button.

Step 4- Check the status of the LED light on the Linksys extender and your router.

Step 5- A white LED light will indicate your Linksys extender is connected to the router.

Step 6- Afterward, your range extender will automatically clone the network settings from your home router.

Step 7- Now, unplug the Linksys device and place it halfway between your router and the dead spot.

Step 8- If the LED light doesn’t blink white, move your extender closer to the router.

Use the web-based WPS button to set up your Linksys wifi extender AC1200

In this method, you will use either a WPS button, WPS PIN, or your router’s PIN to set up your range extender.

a)   WPS button
First, visit the linksys login page. Log in to your extender settings. Click on Wireless and then select the WPS option. Now, press the WPS button on your device to start the setup process. Then click on Enable next to the WPS button.

b)   WPS PIN
If your home router includes a WPS pin, then enter the pin in the given field on the Linksys wifi extender setup page.

c)   Router PIN

Also, if your client device asks for the router’s PIN, then enter that pin in the third field on the given page. Now, check the status of the WPS light. If it is continuously lit, the extender setup has been completed.

Linksys wifi extender reset process

Follow the steps below to reset your Linksys wifi extender AC1200
Before you begin the reset process, make sure the extender is switched on.
Locate the reset button in a little tiny hole on the rear panel of the extender.
After that, push it down with a paperclip or any sharp pin.
Now, hold the button down until the LED lights on the extender begin to blink.
When you release the reset button, the extender will reboot on its own.
Finally, your Linksys device has been restored to factory default settings.

Conclusion

In this post, you have learned How to setup linksys extender without a computer or with a web browser method.