• Gift texaschoicemechanicalservicesllc
  • Share
  • Honor texaschoicemechanicalservicesllc
2 2 1
texaschoicemechanicalservicesllc
texaschoicemechanicalservicesllc
· 23 Nov 2021
Following

Learn the steps to install an air-conditioner on your own

Each air conditioning system is different in its formation, but the common installation process is the same. If you are staying in and around Cedar Hills TX then you can hire AC Installation Cedar Hills TX professionals.

Though we have listed the steps below it is always a good idea to hire contractors who will deal with AC tuneup Cedar Hills TX.

To connect the indoor pipe system with the outdoor pipe system, you will need to cut a hole in the wall. Make sure the location you choose will allow you to do this. Select a location with studs to assure that the wall is solid enough to hold the weight of the system. Install the system at least at a considerable distance away from the antennas and telephones, Wi-Fi, television, etc.

Hold the mounting plate against the wall where you want to install the indoor system. Need a level to make sure that it is both horizontally and vertically level.

Use a marker to mark the site of the screw holes, and drill a hole into the wall. Put the plastic anchors into the hole and fix the plate into the wall with a tapping screw.

Drill a 4-inch hole by the wall so you can feed the pipes outside.

Check the electrical wires on the indoor system.

Conduct the pipes and cable wires by the hole into the wall, and then connect them to the unit.

Secure the indoor system to the mounting plate. It may need a friend to hold the system in the place where you fixed the connection.

Placing the outdoor system away from the trafficked and hot areas. Do not place the outdoor system straight on the ground because the unit is heavy and it can change around on dirt or rocks.

Secure the outdoor machine on top of the concrete pad.

After that check the electrical wires in the outdoor system. Now connect the pipes and cable to the outdoor system. So after connecting the power cable it will run from the indoor system to the outdoor system as well. So now finally you can connect the power supply to an outlet. Follow these steps to strike the right balance in your streetwise look.

  • Comments (1)
AB D
Thanks for your suggestion! Great Idea. Waiting for your next post
Reply

Here are your recommended items...

Here are your milestones...